Description
IFM-4 oil wear particle sensor adopt the latest scientific research technology, use new circuit design and model algorithm, and fully consider the oil viscosity during online monitoring. The sensor monitors the wear degree of mechanical components in the oil, continuously records and evaluates the wear status of the equipment, and plays an important monitoring role in early equipment failure wear. The probe can distinguish between tiny particles and micron-level magnetic fragments, so that early equipment failures can be discovered in time, improving the predictive maintenance data support of the equipment.
Product feature
Specification parameter
Monitoring indicators | Range | Resolution |
Fine particles | 0-100% | 0.1% |
Coarse particles | 1-10 | 1 |
Temperature | -35-85℃ | 0.1℃ |
Electrical properties
Communication interface | Data transmission | Power | Voltage | Weight | Shell material | Cable length | Protection level |
6-core aviation plug | Modbus/CAN/4-20mA | ≤2W | DC 9V-36V | 140g | 316L | 1.5m | IP65 |
High-sensitivity micron particle detection sensor with IP67 protection grade, supports wear alarm open-drain signal output. Real-time monitors wear severity, water saturation and oil degradation, matched for wind power, marine and tunnel boring equipment predictive maintenance.
Cost-effective ferromagnetic debris monitoring unit with millisecond rapid response. Equipped with G1/2 standard oil port thread, withstands 0-5MPa working pressure, ideal for steel metallurgy and power generation lubrication systems.
Complementary sensor paired with IFM series, detects viscosity, density, moisture and oil quality simultaneously. 316L stainless steel housing, Modbus/CAN multi communication, covers all oil types for full-cycle lubrication monitoring.