Description
IFJ series Oil contamination sensor(Oil particle counter) adopts single laser light counting technology, has the advantages of fast detection speed, strong anti-interference, high precision, good repeatability, etc., can accurately detect the size of the particles in the measured oil samples and the number of distribution; combined with the Fourier waveform analysis model, it can greatly enhance the fine measurement precision for the tiny particles and high clean oil. It can automatically correct invalid data and interfering data, and has a very good improvement effect on the influence of trace moisture and air bubbles on the contamination degree which often occurs on the site.
Product parameter
Detection parameters | |
Pollution level, particle size and quantity distribution | |
Detection range | 1～400um |
Sensitivity | 1μm (ISO4402) or 4μm (c) (GB/T18854, ISO11171) |
Detection accuracy | ±0.5 pollution degree grades (typical values) |
Channels qty | 8 |
Detection channels | 1μm、2μm、5μm、10μm、15μm、25μm、50μm、100μm;4μm(c)、4.6μm(c)、 6μm(c)、10μm(c)、14μm(c)、21μm(c)、38μm(c)、70μm(c) |
Built-in standard | GJB420A-96、GJB420B-06、NAS1638、ISO4406 ect |
Calibration standard | ISO4402 or ISO11171 |
Electrical parameters | |
Communication protocol | RS485 MOD BUS R TU,(RS232 Optional) |
Data cable | 2*1mm² |
Power cable | 2*1mm² |
Cable length | 200mm |
Operating voltage | DC 9V～36V |
Power | ≤5W |
Other parameters | |
Oil circuit interface | M12*1.25 |
Pressure range | 0～30bar(Optional pressure reducing device up to 300 bar) |
Flow range | 10～300mL/min |
Oil temperature resistance | -30～+85℃ |
Storage temperature | -40～+85℃ |
Protection level | IP65 |
Shell material | Special aluminum materials |
Seal material | Fluorine rubber |
Weight | 275g |